Baby Lock Ellisimo BLSO Service Manual page 16

Basics of Assembly
3
Attachment of Front cover assy
1. Attach the connector 1 of the lead wire assy main-panel to the panel PCB
assy. 2.
2. Attach the FFC 3 to the panel PCB assy. 2.
*Key point
• Connect the FFC 3 to the connector 4 of the panel PCB
assy. 2 in the state that the blue surface of the FFC 3 is
outside, and then lock it.
3. Set the FFC 3 to the clamp assy. 5, and then close the clamp assy. 5,
and lock it.
4. Set the front cover 6, and then secure it with the screw 1.
*Key point
• Check that the 2 hooks 7 hang on the base plate assy..
• Check that the hook 8 and 9 hang on the rear cover assy..
→
Refer to 3 - 228 "Assembly of Front cover assy".
1
Main parts
Screw, Pan (S/P washer)
M3X6F 0.59 – 0.78 N·m
18
2
Torque
4 5 3
1
1
6
8 9
7
2 - 49