Baby Lock Ellisimo BLSO Service Manual page 19

Test Mode
3. Check switches and sensors function (Test Mode No.29)
State: Current switch or sensor operation.
Record: Switch or sensor operating record. (Use in production line)
Clear button:Reset the record. (Use in production line)
+1 ON
00 OFF
Item:
Foot Jack Foot controller jack
BWD Bobbin winder SW
PFT Presser foot SW
BH lever Button hole Lever SW
BH Front Button hole front SW
BH Back Button hole back SW
PLATE 1 Needle plate A SW
PLATE 2 Needle plate B SW
F Initial Sensor F-pulse motor initial sensor
Z Initial Sensor Z-pulse motor initial sensor
PF Initial Sensor Presser foot-pulse motor initial sensor
TH Initial Sensor Threader-pulse motor initial sensor
TC Initial Sensor Thread cut-pulse motor initial sensor
AT Initial Sensor Auto tension-pulse motor initial sensor
X Initial Sensor X carriage initial sensor
Y Initial Sensor Y carriage initial sensor
Emb Machine Embroidery unit connector
Frame SW 1 Embroidery frame PCB assy. SW 1
Frame SW 2 Embroidery frame PCB assy. SW 2
Frame SW 3 Embroidery frame PCB assy. SW 3
Frame SW 4 Embroidery frame PCB assy. SW 4
Frame Lock Lever Embroidery frame Lock Lever SW
Start Test mode and Contents
21
4 - 5