Baby Lock Ellisimo BLSO Service Manual page 10

Basics of Disassembly
10
Removal of Bobbin winder (upper cover assy)
1. Remove the connector 1 from the main PCB assy..
2. Remove the 3 screw caps 2 from the bobbin winder (upper cover assy.)
3.
*Key point
• Remove the screw cap 2 by using the pin or etc.
3. Remove the 6 screws 1, and then remove the bobbin winder (upper cover
assy.) 3.
→
Refer to 3 - 22 "Bobbin winder unit".
11
Removal of Ground plate B
1. Remove the screw 1 and the screw 2, and then remove the ground plate
B 1.
Main parts
12
1
3
2
3
1
1 1
2
2 - 7