Baby Lock Ellisimo BLSO Service Manual page 56

Adjustment
[Adjustment procedure]
1. Remove the presser foot, the presser foot holder and the needle.
2. Start the test mode, and then select the "54" (Camera Calibration
mode).
3. Press the (Needle position button), and raise the needle
bar up.
(The needle bar move to the left automatically.)
4. Press the button, and then the camera displays image on the
screen. (Fig. 2)
5. Set the pattern sheet to the machine.
*Key point
• Align line 1 and line 1' (between machine and accessory
box).
• Align line 2 and line 2' (between front and rear cover).
(Fig. 3)
• Set the printed "FRONT" side to the front.
<To next page>
(
4 - 36
Camera calibration
BACK
FRONT
Fig. 3
Pattern sheet for calibration
58
Fig. 2
)