Baby Lock Ellisimo BLSO Service Manual page 51

Basics of Assembly
7
Attachment of Front thread guard cover
1. Attach the front thread guard cover 1 with the screw 1.
2. Attach the screw cap 2.
1
8
Attachment of Face plate assy
1. Set the face plate assy. 1 to the arm bed.
2. Open the face plate connector cover 2.
3. Secure the face plate assy. 1 with the 2 screws 1.
4. Close the face plate connector cover 2.
5. Attach the face plate screw cap 3.
*Key point
• Engage the face plate screw cap 3 to the face plate assy. 1
in the state that the notch 4 part of the face plate screw cap
3 is downward.
→
Refer to 3 - 238 "Assembly of Face plate assy".
1
2 - 52
Main parts
Screw, Bind
M4X6
Screw, Pan (S/P washer)
M4X8
Torque
0.79 – 1.18 N·m
Torque
0.79 – 1.18 N·m
53
1
1
1
2 1
1
2 3
4