Baby Lock Ellisimo BLSO Service Manual page 46

Adjustment
[Adjustment standard]
In the test mode "36", the pattern must be in the standard (length and angle).
[Adjustment procedure]
1. Attach the N presser foot.
2. Start the test mode, and then select the "36" (Side Feed Adjustment mode).
3. Sew the pattern with the schappe spun thread #60.
4. Press , to adjust pattern shape is like "OK" below.
1 Pattern should be horizontal, in case not horizontal, go to "4-
22 Feed dog height and parallelism" so that the direction of
the adjusting pattern is near-horizontal and the sewing length
at the upper section is 26 to 31mm.
26 - 31mm
OK
2 Pattern height must be 4.0 to 6.0mm, adjusting by "Fine
Adjust Verti."
OK
3 Pattern length upper and bottom side must be less than 1.0mm, adjusting by "Fine Adjust Horiz."
Less than 1.0mm
OK
Side feed straight stitch
, .
NG
4 - 6mm
NG
NG
NG
Narrow,
press .
Wide,
press .
Upper side long,
press .
Bottom side long,
press .
48
, .
4 - 25