Baby Lock Ellisimo BLSO Service Manual page 59

Adjustment Embroidery center position (embroidery unit)
In case needle does not drop in the center of embroidery sheet hole.
1. Select the test mode "42" (Embroidery Position Adjust mode).
2. Adjust the needle position by pressing the button on the screen for needle to drop in the center of embroidery
sheet hole.
3. After adjustment, turn the power off (adjusting value is memorised automatically).
4. Remove the embroidery hoop, and check the embroidery center position by the test mode "23" again.
61
4 - 33