Maintenance-Every 500 Hours; Change Engine Oil And Replace Filter - Hitachi Zaxis 200LC Operator's Manual

Maintenance—Every 500 Hours

Change Engine Oil and Replace Filter

1. Run engine to warm oil.
2. Park machine on a level surface.
3. Stop engine.
4. Remove drain plug from bottom of engine oil pan, or
open drain valve on side of engine oil pan. Allow oil to
drain into a container. Dispose of waste oil properly.
5. Turn filter counterclockwise to remove. Clean mounting
surface on base.
6. Apply thin film of oil to rubber gasket of new filter.
7. Install new filter. Turn filter clockwise by hand until
gasket touches mounting surface.
8. Tighten filter 3/4—1 turn more.
9. Install drain plug or close drain valve.
Continued on next page
3-9-1
OUT4001,0000326 –19–13AUG07–1/2
081407
PN=133