Avoid Backover Accidents; Avoid Machine Tip Over - Hitachi Zaxis 200LC Operator's Manual

Avoid Backover Accidents

Before moving machine, be sure all persons are clear
of both travel and swing paths. Turn around and look
directly for best visibility. Use mirrors to assist in checking
all around machine. Keep windows and mirrors clean,
adjusted, and in good repair.
Be certain travel alarm is working properly.
Use a signal person when backing if view is
obstructed or when in close quarters. Keep signal
person in view at all times. Use prearranged hand signals
to communicate.

Avoid Machine Tip Over

Use seat belt at all times.
Do not jump if the machine tips. You will be unlikely to
jump clear and the machine may crush you.
Load and unload from trucks or trailers carefully. Be
sure truck is wide enough and on a firm level surface. Use
loading ramps and attach them properly to truck bed.
Avoid trucks with steel beds because tracks slip more
easily on steel.
Be careful on slopes. Use extra care on soft, rocky or
frozen ground. Machine may slip sideways in these
conditions. When traveling up or down slopes, keep the
bucket on uphill side and just above ground level.
Be careful with heavy loads. Using oversize buckets or
lifting heavy objects reduces machine stability. Extending
a heavy load or swinging it over side of undercarriage
may cause machine to tip.
Ensure solid footing. Use extra care when operating
near banks or excavations that may cave-in and cause
machine to tip or fall.
Safety—Operating Precautions
1-3-4
OUT1739,00001C8 –19–05AUG02–1/1
OUT1739,00001C9 –19–05AUG02–1/1
081407
PN=17