Maintenance And Repair Record Keeping System - Hitachi Zaxis 200LC Operator's Manual

Maintenance and Repair Record Keeping
System
Service your machine at intervals shown on this chart. Also, perform service on items at multiples of the original requirement. For example, at
500 hours also service those items (if applicable) listed under 250 hours, 100 hours, 50 hours, and 10 hours or daily.
• Clean fuel tank inlet screen
• Drain fuel tank sump
• Clean radiator air inlet screens
• Drain water separator
• Check air cleaner dust valve
• Check engine oil level
• Check recovery tank coolant level
• Grease swing bearing
• Check track shoe cap screw torque (Track shoes should be inspected and re-torqued at an initial 50 hours and at 250-hour intervals
thereafter.)
Insure machine performance and availability; use only genuine Hitachi parts. Verify part numbers are current and that any associated parts
are also on hand, i.e., filter O-rings.
Maintenance—Periodic Maintenance
SERVICE INTERVALS
As Required
• Check and adjust track sag
• Vent hydraulic oil tank pressure
• Check windshield washer fluid level
• Check hydraulic oil level in cab tilt power pack
• Check oil cooler debris screen (Zaxis 200LC, Zaxis 250)
Every 10 Hours or Daily
• Check hydraulic tank oil level
• Grease working tool pivots
Every 50 Hours
After First 50 Hours
REQUIRED PARTS
Continued on next page
3-2-5
OUT4001,0000274 –19–13AUG07–1/5
081407
PN=104