Check Track Sag - Hitachi Zaxis 200LC Operator's Manual

Check Track Sag

1. Swing upperstructure 90° to tracks and position boom,
arm and front attachment as shown.
2. Raise track off ground with boom.
CAUTION: Prevent possible injury from
unexpected machine movement. Place blocks
under machine frame to support machine while
measuring track sag.
3. Place blocks under machine frame to support machine.
4. Rotate track forward two full rotations and then in
reverse two full rotations.
Maintenance—As Required
Continued on next page
3-3-4
Road Builder Position
Live Heel Grapple Position
Articulated Grapple Position
TX14740,0001F8F –19–06DEC02–1/2
081407
PN=112