PTX3000 Packet Transport Router Quick Start
8
should be aligned with the mounting screws on the opposite side, and the packet
transport router should be level.
Move the lift away from the rack.
5.
If you are installing two to four routers in the rack, repeat this procedure for each router.
6.
See
Figure 5 on page 11
installed in a single rack.
Table 3: Mounting Hole Locations for Installing a Chassis in a Rack
Hole
Distance Above U Division
1
4.9 in. (12.5 cm)
2
15.4 in. (39.1 cm)
3
29.9 in. (76.0 cm)
and
Figure 6 on page 12
for examples of multiple routers
2.8 U
8.8 U
17.1 U
Copyright © 2014, Juniper Networks, Inc.