Juniper PTX3000 Quick Start Manual page 13

Packet transport router

Hide thumbs Also See for PTX3000:

Table of Contents

Connect the grounding cable to a proper earth ground.

Verify that a licensed electrician has attached the cable lug provided with the packet

transport router to the grounding cable.

Ensure that grounding surfaces are clean and brought to a bright finish before you

connect the grounding cable.

Place the grounding cable lug over the grounding points

Secure the grounding cable lug to the grounding points, first with the washers, then

with the acorn nuts.

Verify that the grounding cabling is correct, that the grounding cable does not touch

or block access to the packet transport router components, and that it does not drape

where people could trip on it.

Figure 7: Connecting the Grounding Cable

Step 5: Connect the PTX3000 Packet Transport Router Grounding Cable

(Figure 7 on page

13).

Table of Contents