Table of Contents
Advertisement
4
Press the / button to select the tab.
The selected tab is shown in blue, and
setting items of the selected tab appear.
5
Select an item.
Press the / button to select the item.
The item to be changed is displayed in blue.
6
Make the setting or adjustment on an item.
When changing the adjustment level:
To increase the number, press the button.
To decrease the number, press the button.
When selecting the setting:
Press the / button to select the setting.
If the Control Lock is set to "On," the setting
cannot be changed.
For details about Control Lock, see page 32.
To hide the menu
Press the MENU button.
The menu disappears automatically if a button is
not pressed for one minute.
To hide the operation buttons
Press the CONTROL button.
About the storage of the settings
The adjusted settings are automatically stored in
the monitor memory.
For details on settings for the next power-on,
refer to "Power On Setting" (page 33) in the
System Configuration menu.
About the control navigation
Depending on the state, the operation buttons of
the unit light as shown below:
White light: Operable state.
Green light: Operating state.
Off: Unable to operate.
27
Advertisement
Table of Contents
