Table of Contents
Advertisement
Camera Recording
icon
3
gp
1 Press LCD-OPEN to unlock the LCD
monitor. Swing LCD monitor fully open
and adjust viewing angle.
* If you want to record using EVF, close
and lock LCD monitor.
2 Set POWER to
PAUSE
CAMERA.
Lens Cover opens.
CAUTION :
:
-
|
Rotating partially open LCD
|
Power Lamp lights.
monitor may block cassette door
» Be sure POWER
:
i
EVF or LCD Monitor
and damage Camcorder body.
is fully turned to
{Record Panie mode)
CAMERA position.
SETE NT
e EVF or LCD monitor turns on/off by the
Built-in Twin
POWER switch.
:
Capsule 2-Way
* EVF shuts off when LCD monitor is
:
Microphone
opened and turns back on when LCD is
closed.
* Both EVF and LCD monitor turn on
when LCD is at 180? (see above left).
This allows both you and the subject to
view the recording.
3 LCD
: Turn BRIGHT control to
monitor
adjust LCD monitor
brightness level.
EVF
: Look into EVF and adjust
VISION ADJUSTMENT to
your eyesight.
4 Hold down TAPE SPEED for about 1
second to change tape speed to SP/SLP
(page 11).
Tape speed
5 Press RECORD/
s
PAUSE to start or
RECORD
Note:
pause recording.
. lb se tale ence a eee
right
objects, or
bri
ights, a vertica
6
bar may appeat in ihe Belie, This is
Set POWER to
EVF or LCD Monitor
normal for the CCD pick-up. Try to avoid
OFF when finished.
{Record mode)
this when possible.
* Using LCD monitor reduces battery
* To remove the cassette, slide the
operation time. Return LCD monitor to
TAPE EJECT switch (page 11).
locked position when not in use.
1 6
For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts
@ panasonic.com
Advertisement
Table of Contents
