Operation
4.7 Programming preset counter & sheet insertion program
Step # Description
1
Select program
mode.
2
View program mode.
3
Program a new
value.
4.8 LED indications, third party device
LED Indication Description
Continuous
light
Flashing
LED indication,
On-line
Action
Press "Selection programming mode"
until the LED indicating the program to
be set is lit (preset counter or sheet
insertion program).
Press "Counter reset button".
Press "Counter reset button" to
access the last digit.
Press "Selection programming mode"
to change the setting.
Press "Counter reset button" to
confirm the setting and access the
second digit.
Repeat this for the remaining (2) digits
starting with pressing "Selection
programming mode".
After adjusting the last digit, press
"Counter reset button" to confirm the
settings made.
On-line mode selected
Connected unit stopped
10
Notes
The display will show
the value flashing.
Repeat
these
two
steps
Display shows 000
Notes