Double Move: Movl(032) - Omron CVM1D Operation Manual

Hide thumbs Also See for CVM1D:

Table of Contents

Data Movement Instructions

5-15-3 DOUBLE MOVE: MOVL(032)

Ladder Symbol

When the execution condition is OFF, MOVL(032) is not executed. When the ex-

ecution condition is ON, MOVL(032) copies the content of S and S+1 to D and

Neither D nor S can be the last word in a data area because they designate the

first of two words.

Constants are input using eight digits.

Note Refer to page 101 for general precautions on operand data areas.

Content of *DM word is not BCD when set for BCD.

ER (A50003):

EQ (A50006):

Content of D and D+1 are 0 after execution.

Same status as bit 15 of D+1 after execution.

When CIO 000005 is ON in the following example, the contents of A400 and

A401 are copied into D00200 and D00201, respectively.

Operand Data Areas

CIO, G, A, T, C, #, DM

D: Destination

CIO, G, A, T, C, DM

not changed.

Section 5-15

Address Instruction

Table of Contents