Table of Contents
Advertisement
The User can display the alarm set limits, selecting the dedicated
Alarms icon. After editing the alarm settings, the relative signal will
remain active and the status icon will blink for a pre-set time.
ALARM SILENCING
•
Select the bell icon (or press the RESET key) to interrupt the
acoustic signal for a pre-set period of time.
•
During the silencing period, the text of the alarm will still be
displayed.
•
Select the bell icon (or press the RESET key) once again to delete
the alarm text, only if the alarm activation condition is no longer
present.
•
If during the silencing period, a new alarm (of high priority) occurs,
the alarms silencing command is automatically cancelled and the
acoustic and visual signals are reactivated.
WARNING!! Patient injury hazard
The User should not interrupt patient control during alarms silencing period.
For more information, please see on chapter 5 Alarms.
2-19
Advertisement
Table of Contents
