Table of Contents
Advertisement
2-12
The multifunction encoder knob is used to select, modify and
confirm all the functions shown on display.
The encoder knob is used to access the MENU function and then
to function modes, parameters, alarms, parameters' values and all
is concerned to the normal operation of lung ventilator.
Use of encoder knob.
•
Press the encoder to access the modification (enabling) of the
parameter (function); turn clockwise or counter-clockwise to
select the box.
•
Turn clockwise (counter-clockwise) to increase (decrease);
press the knob to confirm.
If the encoder knob is not pressed within 10 seconds to
confirm a value after modifying it, the lung ventilator will
restore the value prior to the modification.
By pressing START soft key it is possible to start ventilation in the
selected operative mode and with parameters set by operator.
The functional switch ON or OFF of lung ventilator is possible by the
ON/OFF key. To switch on the lung ventilator, press the ON/OFF key.
After a few seconds a series of messages appears on the screen,
indicating that the system is entered in the SELF TEST phase; this
phase takes some minutes.
At the end of this procedure the equipment is ready to ventilate the
patient. Keep pressed the ON/OFF soft key for a few seconds to
switch off the lung ventilator (this function has been introduced to avoid
accidental shutdowns of the same).
When the Led is on (green colour) it indicates that the lung ventilator is
supplied by the main power supply.
User manual, DU3104101
Advertisement
Table of Contents
