Technogym SKILLRUN UNITY 5000 Instructions Manual page 19
Hide thumbs
Also See for SKILLRUN UNITY 5000:
- Manual (33 pages) ,
- Technical service manual (266 pages)
Table of Contents
Advertisement
SKILLRUN (DJJ) Pre-Installation Requirements
Rev. 2.0
LAYOUT 5:
The following figure doesn't show a sheath for cables but Its use is recommended (to be provided
by the customer). The cable must follow the following path. If this is not possible, it's required to
reverse the socket (case of American plug) (to be provided by the customer).
Fig. 10 - Layout 5 OK but the use of a cable sheath is recommended
Fig. 11 - Layout 5 OK but the use of a cable sheath is recommended
- 19 -
Hide quick links:
Advertisement
Table of Contents
Need help?
Do you have a question about the SKILLRUN UNITY 5000 and is the answer not in the manual?
Questions and answers
How do I log in to change my router password on a SkillRun Unity 5000 ?
To change network settings on a Technogym SkillRun Unity 5000, follow these steps:
1. Ensure the equipment is turned on and the software is loaded.
2. On the standby screen, press and hold the touchscreen to the right of the HOME logo for about 4 seconds.
3. Enter the code 2501 (for service menu) using the virtual keyboard.
4. Select the "GENERAL SETTINGS" menu.
5. Configure the Wi-Fi or cabled network settings as needed.
Note: The router password itself must be changed on the router, not on the SkillRun device. The SkillRun allows you to configure which network it connects to but does not manage the router’s settings.
This answer is automatically generated