Maintenance Intervals; Maintenance And Inspection List - Interroll SH 1210 Installation And Operating Instructions Manual

Component
Complete module
Complete module
Side guides
RollerDrive EC5000
PolyVee drive belt
Complete module
Rollers
Bearings
Complete module
RollerDrive EC5000
Version 1.0 (06/2022) en
Translation of original operating instructions
Interroll Roller curve SH 1210
Maintenance and repair

Maintenance intervals

If maintenance is not performed according to schedule, it may lead to damages and failures. If
maintenance intervals are not followed, the warranty will be void.
All bearings of the module feature a life-time lubrication and are maintenance-free within the
operating parameters.

Maintenance and inspection list

Interval Task /
check
Daily Check for contamination.
Weekly Perform an acoustic check.
Monthly Check attachment and fastening
of side guides.
1 month after Check for firm seating in the side
installation of profile.
module
Monthly Check temperature.
Monthly Check for noise.
Monthly Check for damage.
Monthly Check for true running.
Monthly Check electrical connections.
Quarterly Check for wear/damage.
Every 6 months Check moving parts for seating
and wear.
Every 6 months Check running behavior.
Check for wear/damage.
Every 6 months Check for running noise.
Annually Check screw connections.
Annually Ensure that the RollerDrive shaft is
secured properly in the side
profile.
Work to be
performed
Clean and disinfect
Initiate further measures
depending on the
component
Readjust as necessary
Retighten as required
Replace as required
Replace as required
Replace as required
Replace as required
Replace as required
Replace as required
Replace as required
Replace as required
Replace as required
Replace as required
Tighten to applicable
standard as required
Correct as required
Performed by
43