Section 5 General Procedures; Gp 5.1 Cleaning Feed Belts, Discharge Belts And O-Rings - Xerox Versant 4100 Press Manual

Section 5 General Procedures

GP 5.1 Cleaning Feed Belts, Discharge Belts and O-Rings

1. Turn the power switch to O (off) and remove the power cord from the power source.
2. Apply a small amount of isopropyl alcohol to a soft cloth.
3. For belts, use moderate pressure to wipe across one belt at a time while manually rotating it.
Repeat for several rotations of each belt.
4. For O-rings, remove the gate assembly from the gate plate first and then wipe in each direction.
Xerox Customized Envelope Feeder – Problem Solving Guide 5-1