Printing procedures
When you are ready to print your job, follow the procedure for your operating system. The
steps shown may vary depending on the application you are using.
NOTE: The procedures in this section apply to the Document Centre ColorSeries 50
copier/printer. For the DocuColor 12 copier/printer, refer to the product manual supplied by
the manufacturer of the Digital Front End connected to your DocuColor 12.
From Windows 2000
1
Open your document.
2
From the File menu, select Print.
3
In the Select Printer box, select your printer name.
4
From the Layout and Paper Quality tabs, select the desired print settings.
5
From either the Layout or Paper Quality tab, click on the Advanced button.
6
Click on Document Options.
7
Click on Staple.
8
In the Staple drop-down list box, select the desired staple option.
9
Click OK to return to the Print dialog box.
10 Click Print to print your job.
12
IN-LINE STAPLER FINISHER USER GUIDE
Need help?
Do you have a question about the DocuColor 12CP and is the answer not in the manual?