Serial Number Location; Product Identification Plate; Frame Serial Number; Swing Motor Identification Plate - SANY SY60C Operation And Maintenance Manual

INTRODUCTION

Serial Number Location

Product identification plates are located in various places on the excavator. These list model and serial numbers that
will be needed by a SANY dealer when ordering replacement parts or providing assistance for your machine.

Product Identification Plate

The identification plate is on the lower front of the cab.

Frame Serial Number

The frame serial number is stamped on the front of the travel carriage frame.

Swing Motor Identification Plate

The identification plate is on the top of the swing motor.
HYDRAULIC EXCAVATOR
MODEL/TYPE:
OPERATING MASS (kg):
ENGINE POWER (kW):
PRODUCT ID NUMBER:
MODEL YEAR:
East Huancheng Road, Kunshan Development Zone, Jiangsu, China.
Figure 1-2
Figure 1-3
HYDRAULIC EQUIPMENT
MODEL
PCR–4B–
MFG. No.
Figure 1-4
1-4
SANY HEAVY MACHINERY LIMITED
20A–P–9217A
7900158
SY60C Excavator OMM
0002811
0002814
0002815