Index MS32-6.2 Operating Instructions Manual page 56

52
3. Check lubrication pressure and related sensors.
4. Check clamping pressure on main spindle side and related sensors.
5. Check clamping pressure on synchronized side and related sensors.
6. Check hydrostatic pressure and related sensors.
7. Check hydraulic temperature and related sensors.
8. Check cooling lubricant temperature and related sensors (sensor system).
9. Check water temperature, water filter, and fill level using the corresponding
sensors (sensor system).
10. Check water filter (cooling water) and related sensors.
11. Check water flow and related sensors.
12. Check main flow filter (system pressure) and related sensors (sensor system),
replace if necessary.
13. Check bypass filter (hydrostatic system) and related sensors (sensor system),
replace if necessary.
14. Replace oil filter (fluid filter for cooling).
15. Pressure relief valves – test function and check TÜV seal.
16. Check hydrostatic pump.
17. Check quill guide for leaks.
18. Check condition of the hydraulic fluid (visually/sight glass).
19. Visual inspection for leaks.
20. Check fluid lines for damage such as buckling and abrasions, and for liquid
leaks. If necessary, replace fluid lines. Record the age or date of replacement
of the fluid lines. Enter in the customer's service, inspection and maintenance
schedules.
21. Clean hydraulic fluid and hydraulic fluid tank. This activity is not part of
maintenance by INDEX personnel. This activity is to be performed by the
customer.
Maintenance Summary - 2.000 Operating hours
Maintenance Instructions
MS32-6.2
DIM012EN - 03.06.2020