54
EN
Lock Button
MENU/SET Dial
Display
48kHz MODE
FULL SOUND
32kHz MODE
SOUND1
SYNCHRO
0 . 0
INDICATION
ON
DISPLAY
ON
TIMECODE
OFF
4
END
Playback Menu
4
48kHz MODE
FULL SOUND
32kHz MODE
SOUND1
SYNCHRO
0 . 0
INDICATION
ON
DISPLAY
ON
TIMECODE
OFF
END
PLAYBACK
Power lamp
Power Switch
FULL SOUND
SOUND1
SOUND2
FULL SOUND
SOUND1
SOUND2
ON
OFF
ON
OFF
ON
OFF
Advanced Features For Video
Playback Menu
The Playback Menu allows you to set the following
functions:
Playback Sound (32 kHz, 48 kHz), Synchro Comp,
Indication, Display and Time Code. The following
procedure applies to all except Synchro Comp (
89).
1
SELECT OPERATION MODE
Set the Power Switch to "
down the Lock Button. Pull out the viewfinder fully or
open the LCD monitor fully.
2
ACCESS PLAYBACK MENU
Press MENU/SET. The Playback Menu appears.
3
SELECT FUNCTION
Move the highlight bar to the desired function by
rotating MENU/SET. Press it to activate.
4
SET FUNCTION PARAMETERS
Rotate MENU/SET to cycle through the available
settings for the selected function, and stop when the
desired setting appears. Then press MENU/SET, and
the highlight bar automatically moves to "END".
•To set parameters for other functions, repeat steps 3
and 4.
5
CLOSE MENU
Press MENU/SET again, and the menu disappears.
pg. 88,
" while pressing