Warning Indications - JVC GR-DVM70U Instructions Manual

Warning Indications

Indications
TAPE!
TAPE END
SET DATE/TIME!
ERROR!
REFER MANUAL
MEMORY IS FULL
MEMORY CARD!
PLEASE
INITIALIZE
NO STORED
IMAGE
E01 — E06
Displays the battery remaining power.
Remaining power level: high
Remaining power level: exhausted
As the battery power comes close to nil, the battery indicator
When the battery power is exhausted, power turns off automatically.
Appears when no tape is loaded, or when the erase protection tab is set to
"SAVE".
Appears if dirt is detected on the heads during recording.
Appears if condensation occurs. When this indication is displayed, the camcorder
turns off automatically.
Appears for approx. 10 seconds when the Power Switch is set to "
tape is not loaded.
Appears when the tape ends during recording or playback.
Appears when the date/time is not set.
Appears when the clock (lithium) battery is discharged and the
previously set date/time is erased.
Appears when Audio Dubbing is unavailable.
Appears when the MultiMediaCard's memory is full and shooting is not possible.
Displayed for approx. 10 seconds when the Power Switch is set to "
" " when a MultiMediaCard is not loaded.
Appears when there is a problem with a MultiMediaCard and its memory is
corrupt. Initialize the MultiMediaCard.
Appears when the Power Switch set to "
stored in the MultiMediaCard.
The error indications (E01 — E06) show what type of malfunction has occured.
When an error indication appears, the camcorder turns off automatically. Remove
the power supply (battery, etc.) and wait a few minutes for the indication to clear.
When it does, you can resume using the camcorder. If the indication remains,
consult your nearest JVC dealer.
Function
" when there are no images
105
EN
blinks.
( pg. 14)
( pg. 108)
" when a
( pg. 21)
( pg. 13)
( pg. 13)
( pg. 90)
" or
( pg. 91)
( pg. 97)