JVC GR-DVM70U Instructions Manual page 96

96
EN
SYMPTOM
32. Images on the LCD monitor
appear dark or whitish.
33. The rear of the LCD monitor
is hot.
34. The indicators and the image
color on the LCD monitor
are not clear.
35. The LCD monitor or
viewfinder indications blink.
36. Colored bright spots appear
all over the LCD monitor or
the viewfinder.
37. During recording, sound
cannot be heard.
38. Play, Rewind and Fast-
Forward functions do not
work.
39. The tape is moving, but
there is no picture.
TROUBLESHOOTING
POSSIBLE CAUSES
32. • In places subject to low
temperature, images become
dark due to the characteristics
of the LCD monitor. When this
happens, the displayed colors
differ from those that are
actually recorded. This is not a
defect of the camcorder.
• When the LCD monitor's
fluorescent light reaches the
end of its service life, images
on the LCD monitor become
dark. Consult your nearest
JVC dealer.
33. • The light used to illuminate
the LCD monitor causes it to
become hot.
34. • This may occur when the
surface or the edge of the LCD
monitor is pressed.
35. • Certain Fade/Wipe effects,
certain modes of Program AE
with special effects, "DIS" and
other functions that cannot be
used together are selected at
the same time.
36. • The LCD monitor or the
viewfinder is made with high-
precision technology. However,
black spots or bright spots of
light (red, green or blue) may
appear constantly on the LCD
monitor or the viewfinder.
These spots are not recorded on
the tape. This is not due to any
defect of the unit. (Effective
dots: more than 99.99 %)
37. • The optional headphones are
not connected to the
headphones connector.
• The sound volume of the
headphones connector was not
adjusted appropriately. The
sound volume at this point is
the same as the level it was
adjusted to during playback.
38. • The Power Switch is not set to
" ".
39. • Your TV has AV input terminals,
but is not set to its VIDEO mode.
• The cassette's cover is open.
CORRECTIVE ACTION
32. • Adjust the brightness and
angle of the LCD monitor
( pg. 23).
33. • Close the LCD monitor to turn
it off or set the Power Switch
to "OFF", and let the unit cool
down.
34.
————
35. • Re-read the sections covering
Fade/Wipe effects, Program
AE with special effects and
"DIS" ( pg. 38, 41 – 45).
36.
————
37. • Connect the optional
headphones to the head-
phones connector
( pg. 100).
• Adjust the sound volume
during playback (
38. • Set the Power Switch to
" " ( pg. 52).
39. • Set the TV to the mode or
channel appropriate for video
playback ( pg. 70, 71).
• Close the cassette's cover
( pg. 14).
(cont.)
pg. 52).