Playback Special Effects - JVC GR-DVM70U Instructions Manual

Power Switch
Play (4) Button
PLAYBACK EFFECT
4 OFF
1 CLASSIC FILM
2 MONOTONE
B/W
3 SEPIA
4 STROBE
5 VIDEO ECHO
Remote sensor
PLAY
EFFECT
EFFECT ON/OFF
PLAYBACK EFFECT
Select Menu
T W
RM-V713U
(provided)

Playback Special Effects

FEATURE:
PURPOSE:
To allow you to add creative effects to the video
playback image. You can use any one of the 5 effects.
OPERATION:
1) To start playback, press PLAY (4).
2) Point the remote control at the camcorder's remote
sensor and press EFFECT. The PLAYBACK EFFECT
Select Menu appears.
3) Move the highlight bar to the desired effect by
pressing EFFECT. The selected function is activated
and after 2 seconds the menu disappears.
To deactivate the selected effect, press EFFECT ON/
OFF on the remote control. Pressing it again re-
activates the selected effect.
To change the selected effect, repeat from step 2 of
the above "OPERATION".
NOTES:
When some Playback Special Effects are used, the
Multi-Analyzer 4 and Multi-Analyzer 9 Snapshot
modes ( pg. 33) are not available.
The effects that can be used during playback are
Classic Film, Monotone, Sepia, Strobe and Video
Echo. The effects work the same in playback as they
did in recording. Refer to page 45 for more
information.
83
EN