JVC GR-DVM70U Instructions Manual page 89

MENU/SET Dial
Display
48kHz MODE FULL SOUND
32kHz MODE SOUND1
4 SYNCHRO 0 . 0
INDICATION ON
DISPLAY ON
TIMECODE OFF
END
48kHz MODE FULL SOUND
32kHz MODE SOUND1
4
SYNCHRO 0 . 0
INDICATION ON
DISPLAY ON
TIMECODE OFF
END
(Recording deck)
Power Switch
Playback Menu
TV
VCR
ADJUSTMENT OF VCR'S AGAINST
CAMCORDER TIMING
4
ACCESS PLAYBACK MENU
Point the remote control at the camcorder's remote
sensor and press R.A. EDIT ON/OFF to make the
Random Assemble Editing menu disappear, then
press MENU/SET. The Playback Menu appears.
5
SELECT FUNCTION
Move the highlight bar to "SYNCHRO" by rotating
MENU/SET, then press it. The value for "SYNCHRO"
is highlighted.
6
INPUT CORRECTION DATA
Based on the diagnostics performed (
can now increase the VCR's speed by rotating
MENU/SET upward. You can also slow down the
VCR's speed by rotating MENU/SET downward. The
adjustment range is from –1.3 to +1.3 seconds, in
0.1-second increments.
7
CLOSE MENU
Press MENU/SET twice.
•Now perform Random Assemble Editing beginning
with step 4 on page 85.
NOTES:
Before performing actual Random Assemble Editing, do
a few Random Assemble Editing trial runs to check
whether the value you have input is appropriate or not,
and make adjustments accordingly.
Depending on the recorder, there may be situations
where the timing difference cannot be fully corrected.
89
EN
pg. 88), you