Advanced Features For Video And D.s.c - JVC GR-DVM90 Instructions Manual

24
EN
START/STOP Button
MODE Dial
SNAPSHOT Button
RECORDING
POWER
Switch
Lock Button

Advanced Features For Video And D.S.C.

Progressive Mode Recording
This mode lets you record moving images (successive
jitter-free still images) onto a tape. Images can then played
back jitter-free, with superior quality. High-resolution still
images can also be processed on a personal computer or
can be printed out (
1
Set the MODE Dial to "
Switch to "
Button located on the switch. Pull out the viewfinder
fully or open the LCD monitor fully.
2
To start Progressive Mode Recording, press START/
STOP.
To End Progressive Mode Recording . . .
.... press START/STOP. The camcorder enters the Record-
Standby mode.
NOTES:
When an image recorded using the Progressive Mode is
played back, the image may not look natural.
When the MODE Dial is set to "
Dissolve ( pg. 36) and some Program AE with special
effects ( pg. 38) cannot be used.
If SNAPSHOT is pressed in the PS mode, a snapshot will
be recorded with higher quality than in VIDEO mode.
( pg. 20).
pg. 61).
", then set the POWER
" while pressing down the Lock
", Picture Wipe/