JVC GR-DVM70U Instructions Manual page 95

SYMPTOM
23. The Video Echo mode does
not work.
24. Even when Slow Shutter is
not selected, the image looks
like it is activated.
25. There is no strobe when the
Classic Film or Strobe mode
is activated.
26. White Balance cannot be
activated.
27. When shooting a subject
illuminated by bright light,
vertical lines appear.
28. When the screen is under
direct sunlight during
shooting, the screen
becomes red or black for an
instant.
29. During recording, the date/
time does not appear.
30. Images stored in the
MultiMediaCard cannot be
deleted.
31. The indicators and messages
do not appear.
POSSIBLE CAUSES
23. • The Picture Wipe or
Dissolve functions are in use.
• The Squeeze mode is selected
in the Mode Menu.
• A Fade-In or Fade-Out is in
progress (White Fader, Black
Fader or Black & White Fader).
• Dissolve during 5-second
mode recording is in use.
24. • When shooting in the dark,
the unit becomes highly
sensitive to light and the
image takes on an effect
similar to Slow Shutter.
25. • The Picture Wipe or Dissolve
function is in use.
• Dissolve during 5-second
mode recording is in use.
26. • The Sepia or Monotone mode
is activated.
27. • This is a result of exceedingly
high contrast, and is not a
malfunction.
28. • This is not a malfunction.
29. • "DISPLAY" is set to "OFF" in
the Date/Time Menu.
• Self-Recording is performed.
30. • Images stored in the
MultiMediaCard are
protected.
31. • "ON SCREEN" is set to "OFF"
in the Date/Time Menu.
• You have made the indicators
disappear.
CORRECTIVE ACTION
23. • Make sure the Squeeze mode
is set to "OFF" (
38).
• Do not try to use the Video
Echo mode during a Fade-In
or Fade-Out or when Dissolve
is activated during 5-second
mode recording (
45).
24. • If you want the lighting to
look more natural, set GAIN
UP to "AGC" or "OFF" in the
Mode Menu ( pg. 36 – 38).
25. • Do not try to use the Classic
Film or Strobe mode during a
scene transition (
45).
26. • Turn off Sepia or Monotone
before setting White Balance
( pg. 44, 45).
27.
————
28.
————
29. • Set "DISPLAY" to "ON" in the
Date/Time Menu (
• During Self-Recording, the
date/time does not appear
( pg. 23).
• Set "INDICATION" to "ON"
in the Date/Time Menu
( pg. 29).
30. • Remove protection from the
images stored in the
MultiMediaCard and delete
them ( pg. 62, 64).
31. • Set "ON SCREEN" to "ON" in
the Date/Time Menu
( pg. 28).
• Set "INDICATION" to "ON"
in the Date/Time Menu
( pg. 29).
CONTINUED ON NEXT PAGE
95
EN
pg. 36 –
pg. 44,
pg. 44,
pg. 28).