Navigational Methods; Menu Bar Selections - ADC PG-PLUS PLL-722 Manual

SCP-PLL722-010-04H

Navigational Methods

The following keyboard keys are your means to navigate through the menus and screens:
- keys Selects and executes an underlined or highlighted menu item.
A Z
Moves left across main menu. Moves the cursor to the left.
←
Moves right across main menu. Moves the cursor to the right.
→
Moves up the submenu selection. Moves the cursor up the screen items.
↑
Moves down the submenu selection. Moves the cursor down the screen items.
↓
+
Returns to the PAU or PMU Main screen. The ADC banner appears briefly and then the Main menu bar
CTRL R
displays.
No effect. At COLU screen cycles through choices.
SPACEBAR
Exits the current screen and returns to the previous screen. Selection changes made on the current screen
ESC
are discarded. Press
Moves to submenu or screen selected. At the screen, it submits all selection changes on the current screen
ENTER
and makes them effective in the system.

Menu Bar Selections

Table 3 describes the menus and submenus selectable from the COLU menu bar.
Select the underlined
To:
alpha character:
Main View the circuit configuration.
View performance summary information.
View alarm summary information.
Performance View HDSL Summary and reset the minimum and maximum margin counts.
View date and time of the last reset of the minimum and maximum margin counts.
View information about the HDSL span, 24-hours of performance history including ES, UAS and
validity of counts.
Clear the history screens.
View 7-day history plus current day's accumulated performance information including ES, UAS
and validity of counts.
View POTS signal history on any of the POTS units, and clear the Trace buffer.
Alarms View the HDSL History screen detailing, number of times each alarm occurred, time and date of
first and last occurrence, provisioned notification type, and current status.
Clear the alarm history
Config View or change options such as SDT, HDSL Periodic Power Up, and System ID.
View or change alarm types of all System alarms
View or change threshold crossing values for the 24-hour ES count and low margin dB.
View or change the HDSL and DSL line power alarms.
Set or change POTS signaling transmit level at the RT.
Set all operating parameters to factory defaults.
Test Test subscriber drop by either of two methods.
View results that include hazardous voltages, foreign voltages, resistive faults, and CPE
termination status.
Info Summary of navigational methods
Display registration information to track product manufacturing, configuration, and revision state.
PLL-722 List 1
in a text field to cancel the text entry and restore the old value.
ESC
Table 3.

Menu Bar Selections

January 6, 2003
COLU Main Menu
13