Test Submenu - ADC PG-PLUS PLL-722 Manual

Test Submenu

3 Type at the
Continue?
Y
is. A confirmation message is displayed.
4 Press to move up a menu level, or
ESC
This does not make the configuration changes permanent. The
make the changes permanent.
T S
EST UBMENU
PG-Plus supports testing of a subscriber drop in two ways. A test can be initiated by applying a test voltage
between the Tip and Ring at the COLU through an MLT test set, or by selecting it from the menu item through
the VT-100 terminal connected to the PAU/PMU maintenance port. The relays in the COLU and RT provide a
path for performing a SDT.
1 Select Test at the menu bar and press
2 Scroll to the desired POTSn or ISDN1 option and press
32
prompt to reset the system to the Factory Default values, or
+
CTRL R
to display the submenu.
ENTER
January 6, 2003
to return to the PAU/PMU Main menu.
Save Configuration
to start the test:
ENTER
SCP-PLL722-010-04H
to leave the values as
N
option must be used to
PLL-722 List 1