Water Connection Fittings; Water Intake; Water Intake Connection; Water Supply Tap Position - Smeg GW2145 User Manual

14 WATER CONNECTION FITTINGS

Key to abbreviations used for water connections.
CODE FILLING/DISCHARGE
cw
dw
d
cd

14.1 WATER INTAKE

14.1.1 WATER INTAKE CONNECTION

The appliance has two intake hoses, for mains and demineralised water.
The hoses are designed to be connected to taps with 3/4'' gas threaded attachment.
Use the filter provided, "A" in the illustration, when connecting the end of the intake hose.
MODELS
GW2145, GW1160,
GW4060, GW4190
GW1160W, GW4060W,
GW4190W

14.1.2 WATER SUPPLY TAP POSITION

Water supply taps must be positioned close to the appliance, in a position accessible to the user. With reference to
the diagram below, the recommended measurements are:
There are no particular height requirements for the position of the water supply taps, but bear in mind that the hoses
supplied are about 2 metres long.
fig. 54 – Diagram. The water supply connections may be on the right or left of the appliance, always considering the maximum distance "I".
User Manual
INTAKE cold water hose - cw (cold water)
INTAKE pressurised demineralised water hose - dw (demi water)
DRAIN appliance drain hose - d (drain)
DRAIN steam condenser drain hose - cd (condenser drain)
fig. 53 – Fit the filters provided when connecting the intake hose.
CONNECTIONS
NUMBER
2
3
I < 50 cm - HC < 100 cm
GW2145 - GW1160 - GW4060 - GW4190
WATER TYPE
CONNECTION TYPE
cw dw
1 1
1 1
hw
---
1
Page 79 - 86