Data Connection - Smeg GW2145 User Manual

15 DATA CONNECTION

The device has a data communication port which can be used for one of the following functions:
1. Connection to an optional external "Smeg WD-PRINTE" printer. The printer produces a brief report with the
key cycle data.
2. PC connection for digital data storage and interaction with the appliance by means of the "Smeg TRACELOG"
program.
Reference should be made to the specific instructions of the above accessories for any connection details.
GW2145, GW1160, GW4060 Series
GW4190 Series
The following are located above the panel that carries the main switch and the printer (if installed):

RS232 port: for data transmission – connection by means of Smeg TRACELOG software.

"Data output" switch: used to activate the panel printer or data transmission on the RS232 port. These two
devices can never operate simultaneously. The data output switch activates the printer when turned to "II" or
the RS-232 port when turned to "I".
fig. 60 – GW4190: Position of the RS-232 port and the data output switch which activates the printer or the RS-232 port.
User Manual
fig. 59 – Position of the RS-232 serial port on the device
GW2145 - GW1160 - GW4060 - GW4190 Page 84 - 86