Preparing The Load For Washing And Disinfection - Smeg GW2145 User Manual

4.8

PREPARING THE LOAD FOR WASHING AND DISINFECTION

Loading instructions are provided in compliance with 5.4.4-k of IEC61010-2-040:2005.
The load for processing must be arranged appropriately on the most suitable supports for machine-washing.
Effective washing starts with preparation of the elements / glassware for processing.
Therefore, before placing the glassware and the other items of the load in the specific baskets, it is
necessary to remove any large residues deriving from previous use, by soaking, treatment or
rinsing.
Stainless steel items cannot be immersed in physiological solutions of sodium chloride, as prolonged contact causes
corrosion and damage to the surface due to stress corrosion cracking.
Do not overload the washing baskets to ensure effective mechanical action of the water across the entire surface of
the glassware.
To allow effective cleaning and prevent damage to the objects for processing, glassware must be properly arranged on
the most suitable supports for machine-washing.
Contact Smeg for advice about the washing trolleys best suited to your needs instruments@smeg.it
Items which can be dismantled must be prepared and stowed as instructed by the manufacturer.
For effective cleaning, items with hinged joints must be opened to minimise the overlapped surfaces. The instrument
holder devices used and the fixing devices must be designed so that no shadow zones are created during subsequent
cleaning and disinfection.
Make sure that there are no labels on the glassware for washing which may detach during the process.
GLASSWARE WASHING SUPPORTS - TROLLEYS
The appliance comes without washing trolleys.
Refer to the washing trolley manuals for guidance on their correct use.
Avoid direct, repeated contact with dirty material.
Always take the greatest care and use suitable personal protection equipment, both before and after
treatment.
Before processing glassware or any other object in the glassware washer, check on the
manufacturer's instructions that the items are approved for automatic treatment in the Glassware
Washer and also the recommended maximum washing temperature.
User Manual GW2145 - GW1160 - GW4060 - GW4190 Page 30 - 86