Product Dimensions - Measurements In Mm; Gw1160, Gw4060 Series - Smeg GW2145 User Manual

11 PRODUCT DIMENSIONS - MEASUREMENTS IN mm

Preliminary note
The dimensions given below are nominal ones; when providing a housing space always consider at least + 5mm ( 0.2
inch ) per dimension to create a minimum space necessary, for the extraction of the machine from the housing, for
maintenance operations.
11.1 GW2145
The appliance can be requested with top for built-in installation for special requirements.
In this case, the product is 20 mm shorter than the stated height.
CONFIGURAZIONE
STANDARD
STANDARD + PAD1

11.2 GW1160, GW4060 SERIES

The appliance can be requested with top for built-in installation for special requirements.
In this case, the product is 30 mm shorter than the stated height.
VERSION
STANDARD
STANDARD + AQUASTOP
STANDARD + PAD1
STANDARD + P3
User Manual
A B
620 600
730 / 770 600
fig. 48 – Product overall dimension diagram
A B
600 600
600 600
710 / 750 600
660 600
GW2145 - GW1160 - GW4060 - GW4190
C D
30 450
30 450
C D
30 600
30 600
30 600
30 600
E
F
850
> 10
850
>10
E
F
850
> 10
857
> 10
850
>10
850
> 10
Page 72 - 86