Key To The Symbols Used In The Manual And On The Appliance - Smeg GW2145 User Manual

2

KEY TO THE SYMBOLS USED IN THE MANUAL AND ON THE APPLIANCE

The following is the key to the symbols used on the appliance and in this manual, as required by point 5.4.4.e of
IEC61010-2-040:2005.
Read with particular attention.
(Symbol which appears beside particularly important instructions or warnings).
Warning, danger: refer to the manual.
(The symbol appears on the appliance's technical dataplate to emphasise that staff must read the
manual before using the device. The symbol appears in the manual next to safety instructions)
Warning, hot surface.
(the symbol is affixed to the appliance close to parts which may heat to high temperatures and
constitute a burn hazard - do not touch parts near this symbol. The symbol appears in the manual
to emphasise safety instructions relating to the burn hazard).
Warning, electric shock hazard.
(The symbol is affixed close to live parts - the device's power supply must be disconnected before
doing any work on these parts. Never touch live parts unless the electricity supply is disconnected).
Transport and unpacking precautions.
Flammability hazard.
Biohazard.
At the end of its working life, the product must be consigned to a disposal plant for recovery and
recycling in accordance with the relevant legislation in the country of installation. Contact the
specialist disposal consortia. This appliance is marked according to the European Directive
2002/96/EC on waste electrical and electronic equipment (WEEE). By ensuring this product is
disposed of correctly, you will help prevent potential negative consequences for the
environment and human health, which could otherwise be caused by inappropriate waste handling
of this product.
CE marking; the manufacturer guarantees compliance with the EU directives applicable to the
product. This symbol appears on the machine's technical data label and in this manual.
User Manual GW2145 - GW1160 - GW4060 - GW4190 Page 11 - 86