Technical Data - Smeg GW2145 User Manual

10 TECHNICAL DATA

The documentation includes a description of the rated characteristics of the electrical connection, all the intake and
outlet connections and the ambient conditions for which the appliance was designed (ref. point 5.4.2 of IEC61010-
1:2001). For "non electric" intakes, the pressure and flow ranges are provided (ref. point 5.4.2 IEC61010-2-040:2005).
Type of water required
Pressure
Type of threaded connection
Required flow [min - max]
Mains water hardness [max]
(for models equipped with a steam condenser, the
use of purified water with hardness below 15°f is
recommended).
Fe2+ / Fe3+ [max]
water temperature [max]
Demineralised water conductivity [max]
Limits depending on microbial
contamination
Series
Standard External [Height x Width x
Depth]
Standard External - aquastop accessory
[Height x Width x Depth] - overall height is
increased by +7mm
Standard External - PAD1 accessory
[Height x Width x Depth] - overall depth is
increased by +110mm
(depending on the
installed).
Standard External - peristaltic pump P3
accessory [Height x Width x Depth] – Only
for GW1160, GW4060: overall depth is
increased by +60mm
Net weight
Weight of appliance + packaging
Washing chamber
External surface
User Manual
WATER SUPPLY REQUIRED
Minimum microbiological quality required: "potable water" (ref. limits
in accordance with Italian Legislative Decree 31/2001)
DIMENSIONS and WEIGHT
850 x 450 x 620
/ +150mm
model of PAD
GW2145 - GW1160 - GW4060 - GW4190
1 - Mains (required)
200 kPa – 500 kPa (2 bar – 5 bar)
2 - 12 litres / min
42 °f
35°C
-
GW2145 GW1160, GW4060
850 x 600 x 600
- 857 x 600 x 600
850 x 450 x
850 x 600 x 710 / 760
730 / 770
- 850 x 600 x 660
56 kg
66 kg
MATERIALS
2 -
Demineralised
(recommended)
3 / 4 "
-
0.5 ppm
35°C
30μS/cm
850 x 900 x 600
857 x 900 x 600
850 x 900 x 710 /
850 x 900 x 600
72 kg
90 kg
AISI 316L
AISI 304
Page 70 - 86
3 - hot
42 °f
35°C
-
GW4190
760
105 kg
120 kg