2.1 GUI Introduction
Click
to start/stop auto-switch. The screen will automatically switch to the next one.
●
Right click a camera, or click
●
Double click a camera to view it in single-screen mode. Double click again to exit single-screen
●
mode.
Change a camera live view screen by dragging it from its screen to the desired screen.
●
Scroll up/down to turn to previous/next screen.
●
Position the cursor on a camera to show shortcut menu.
●
Button
In the live view interface, there are icons at the upper-right corner of the screen for each
●
camera, showing the camera recording and alarm status.
Icon
Right click your mouse to display the shortcut menu.
●
2.2 PTZ Control
2.2.1 Configure PTZ Parameter
You shall configure PTZ parameters before controlling a PTZ camera.
Network Video Recorder User Manual
Chapter 2 Live View
to enter full screen mode.
Figure 2-1 Shortcut Menu
Table 2-1 Shortcut Menu Description
Start playing videos recorded in the latest five minutes.
Digital zoom. You can adjust zoom-in times and view the desired area.
Click it to enter PTZ control mode.
Turn on/ o ff live view audio.
Switch video stream.
Table 2-2 Live View Icon Description
Alarming (normal event and smart event).
Recording.
Description
Description
5