Configure Sms - HIKVISION DS-7600NI-K2/4G Series User Manual

5. Set online schedule for wireless dial.
1) Click Dial Schedule.
2) Click Edit.
3) Select a day of the week.
4) Set the online period for the day. Up to 8 periods are allowed for a day.
5) Set the online period for other days. You can click Copy to copy the period to other days.
6) Click OK.
6. Set keep alive parameters. A keep alive (KA) is a message sent by one device to another to check
that the link between the two is operation or to prevent the link from being broken.
1) Enable keep alive.
2) Set Test Interval (min). The interval is the duration between two successive keep alive
retransmissions if acknowledgment to the previous keep alive transmission is not received.
3) Enter server IP address in Server.
4) Click Test to test if the settings are valid.
7. Click Apply.

6.6.2 Configure SMS

When SMS alarm linkage action is enabled, the device will send a text message to a cellphone user
if an alarm is detected. Moreover, the SMS self-service enables you to send text messages as
commands to turn on/off wireless dial, view dial status, enable/disable SMS alarm linkage action.
Steps
1. Go to Configuration → Wireless → SMS Settings .
2. Turn on Enable SMS Self-Help Service, it enables you to send text messages as commands to
control the wireless dial related functions.
101
102
Network Video Recorder User Manual
Figure 6-34 SMS Settings
Table 6-1 SMS Self-service Text Message Description
Text Message
Enable wireless dial.
Disable wireless dial.
82
Description