Advanced Settings - HIKVISION DS-7600NI-K2/4G Series User Manual

Configure HDD Quota
Each camera can be configured with an allocated quota for storing videos.
Steps
Note
This function is only available for certain models.
1. Go to Configuration → Record → Storage Mode .
2. Set Mode as Quota.
3. Select a camera to set quota in Camera.
4. Enter the storage capacity in Record Capacity.
Note
When the quota capacity is set to 0, all cameras will use the total capacity of HDD for videos and
pictures.
5. Click Apply.
6. Restart the video recorder to activate the new settings.

6.5.5 Advanced Settings

Steps
1. Go to Configuration → Record → Advanced .
2. Configure the parameters as your desire.
Overwrite
Disable: When the HDD is full, video recorder will stop writing.
●
Enable: When hard drive is full, video record will continue to write new files by deleting the
●
oldest files.
Enable HDD Sleeping
HDDs which are free of working for a long time will turn into sleep status.
Save Camera VCA Data
Network Video Recorder User Manual
Figure 6-32 Quota
80