HIKVISION DS-7600NI-K2/4G Series User Manual page 68

Before You Start
Ensure your network camera is on the same network segment with your video recorder.
●
Ensure the network connection is valid and correct.
●
Ensure the network camera is activated.
●
Steps
1. Go to Configuration → Camera → Camera → IP Channel .
2. Click .
3. Enter network camera parameters.
Use Channel Default Password
If it is enabled, the video recorder will add the camera by the set channel default password.
4. Click Add.
Edit Connected Network Camera
You can edit the IP address, protocol and other parameters of the added network cameras.
Network Video Recorder User Manual
Figure 6-11 Add IP Camera
55