HIKVISION DS-7600NI-K2/4G Series User Manual page 38

2. Select a camera.
3. Turn on Enable.
4. Set the motion detection area.
- Click Draw Area or Clear to draw or clear areas. The first area is set as full screen by default.
- Click Full Screen to set the motion detection area as full screen. You can drag on the preview
window to draw motion detection areas.
5. Adjust Sensitivity. Sensitivity allows you to calibrate how easily movement could trigger the
alarm. A higher value results in the more readily to triggers motion detection.
6. Optional: Set Target Detection as Human or Vehicle to discard alarms which are not triggered
by human body or vehicle. Only certain camera models support this function.
7. Set the arming schedule. Refer to Configure Arming Schedule for details.
8. Set the linkage actions. Refer to Configure Alarm Linkage Action for details.
9. Click Apply.
Line Crossing Detection
Line crossing detection detects people, vehicles, and objects crossing a set virtual line. The
detection direction can be set as bidirectional, from left to right or from right to left.
Steps
1. Go to Configuration → Camera → Event → Line Crossing .
Network Video Recorder User Manual
Figure 5-10 Motion Detection
25