Configure Route Service - HIKVISION DS-7600NI-K2/4G Series User Manual

3) If Package Type is set as Month Package, set the start time of your month data package.
4) Select an option for Data Limit Notification.
Turn Off Data and Notify
When the data usage exceeds the limit, the device will turn off wireless dial, and notify you.
Only Notify
When the data usage exceeds the limit, the device will notify you, but keep wireless dial on.
5) Set the notification method. Sound Alarm, Email, and SMS are available.
6) Set Data Warning Limit. When the data usage exceeds the warning limit, the device will notify
you by the method(s) you have selected, but it will not turn off wireless dial.
7) Click OK.
4. Click Apply.

6.6.5 Configure Route Service

The device can be used as a router to share its wireless network with other video recorder(s).
Before You Start
Ensure the wireless dial function is properly configured, and the wireless network is accessible.
●
Ensure other video recorder(s) are on the same network segment with your video recorder.
●
Steps
1. Go to Configuration → Wireless → Route Settings .
2. Turn on Enable Route Service.
3. Click Add.
4. Enter the IP address of the other video recorder.
5. Click OK.
6. Log in to the other video recorder, and set its gateway IP address. The gateway IP address is the
wired LAN IP address of your wireless network video recorder. You can go to Configuration →
Network → General → TCP/IP to view the IP address of your wireless network video recorder.
Network Video Recorder User Manual
Figure 6-36 Rout Settings
84