Racelogic PerformanceBox Sport User Manual page 21

Configuring and using the VCI input
(PBMIC01C only)
The PBMIC01C version of the PB Sport has the ability for its CAN port to be used as a 16channel vehicle CAN interface.
Note: When the PB Sport is configured in VCI mode it is not possible to connect and log data from Racelogic
input modules.
Cables required
Description
5-way Fischer to 9 way 'D' connector (female) – 1m
(CAN cable)
9-way 'D' connector (male) to OBDII connector – 1.2m
When the PBMIC01C is connected to PBSport setup software an extra Tab labelled CAN will be displayed.
Enabling VCI Mode
• Connect the PBMIC01C to the computer via the USB cable
• Run the PB Sport Setup software.
• Click the 'Read settings' button to read the current configuration out of the connected PBMIC01C
• Click on the CAN tab to display the CAN page.
• Select the 'Enable VCI' option.(shown in screen shot below)
The screen shot below displays the CAN page when the VCI is enabled. Displayed are the 16 CAN channels, which in
this case have all been configured to read CAN data from other Racelogic products.
For a VCI channel to be included in the logged file it must be 'Ticked' as shown on all the channels in the screen shot,
below.
https://en.racelogic.support//Product_Info/Legacy_Products/PerformanceBox_Sport/PB_Sport_-_User_manual/06_-_PB_Sport_-
Product Code
RLCAB019F
RLVBCAB20
_Configuration
21