Table of Contents
Advertisement
• At the last window click 'Finish' to complete the installation.
• After a short period of time a window will ask you if you wish to reboot your computer; click 'No'.
Now disconnect then reconnect the PerformanceBox Sport from its power supply. Your computer should now recognise
the unit. When you run the PerformanceBox Sport Setup software it will recognise the USB connections.
Please note that, due to the nature of USB communications, the above procedure may occasionally fail at various
stages. Should this happen, please repeat the procedure three or four times, if necessary, prior to requesting technical
support.
https://en.racelogic.support//Product_Info/Legacy_Products/PerformanceBox_Sport/PB_Sport_-_User_manual/05_-_PB_Sport_-
_Using_USB
16
Advertisement
Table of Contents
Need help?
Do you have a question about the PerformanceBox Sport and is the answer not in the manual?
Questions and answers