Racelogic PerformanceBox Sport User Manual page 11

Logged Channels
The following channels are non-selectable (always logged):
• Satellite count
• UTC time (ms since midnight)
• Latitude (0000.00000 minutes decimal minutes)
• Longitude (00000.00000 minutes decimal minutes)
• Speed (000.000 km/h)
• Heading (000.00°)
• Height (0000.00 m)
• Vertical velocity (0000.00 km/h)
• Longitudinal Acceleration (0000.00 g, smoothed over 4 samples)
• Lateral Acceleration (0000.00 g, smoothed over 4 samples)
• Distance from power on (POR Distance) (0000000.00 m)
• Accumulated distance (permanent) (0000000.00 m)
• Date from GPS (ddmmyy)
Logged File Format
PerformanceBox Sport files are saved in a standard space delimited text format. This allows the data to easily be
imported into third party applications such as word processors or spreadsheets. Each file contains a header section
before the main data that describes the channel content and information about the PB Sport itself, such as serial number
and firmware version.
The [column names] section specifies the data in each column of the data section.
An example of a PB Sport .VBO file is shown below.
Note that the "File created" time and date is derived from GPS UTC time and date, so will not reflect your local time
unless this has been set within the PB Sport setup software.
https://en.racelogic.support//Product_Info/Legacy_Products/PerformanceBox_Sport/PB_Sport_-_User_manual/04_-_PB_Sport_-
_Logging
11