Fiber Optic Ethernet Ports - Siemens SIMATIC NET RUGGEDCOM RSG2300P Installation Manual

Communication Ports
4.3 Fiber Optic Ethernet Ports
Yellow (Solid)
Yellow (Blinking)
Off
Pin-Out
The pin-out for the PoE ports is as follows:
8
Figure 4.4
Specifications
For specifications on the available PoE ports, refer to
Specifications (Page
4.3

Fiber Optic Ethernet Ports

Fiber optic Ethernet ports are available with either MTRJ (Mechanical Transfer
Registered Jack), LC (Lucent Connector), SC (Standard or Subscriber Connector) or ST
(Straight Tip) connectors. Make sure the Transmit (Tx) and Receive (Rx) connections
of each port are properly connected and matched to establish a proper link.
1
1
2
Figure 4.5
26
State
1
RJ45 Ethernet Port PoE Pin
Configuration
31)".
2
Tx Connector
Rx Connector
MTRJ Port
Description
Link established
Transmitting/receiving
No link detected
Pin
1
2
3
4
5
6
7
8
"PoE Power Supply
1
Tx Connector
1
Rx Connector
2
Figure 4.6 LC Port
Installation Manual, 04/2022, C79000-G8976-1047-18
Description
RX + and Power -
RX - and Power -
TX + and Power +
Reserved (Do
Not Connect)
Reserved (Do
Not Connect)
TX - and Power +
Reserved (Do
Not Connect)
Reserved (Do
Not Connect)
2
RUGGEDCOM RSG2300P